EI board is a factory-made, non-insulating sheathing board product. It can be used for a number of applications including wall and ceiling, fascias, soffits, the backing and underlayments. It is made of a type of mineral cement but with much improved characteristics such as fire resistance, weather ability, strength, resistance to mold and mildew, and so on.
Board is available in many forms, and for building construction comes in various thickness and sheet sizes. It also comes in various grades, such as smooth finishes, rough textures, and utility grades. It is white, beige or light grey in colour and has a hard sound when rapped with your knuckles somewhat like Portland cement board.
Like, any sheathing board can absorb water but its performance is unaffected. Thus it can be used indoors and outdoors, and in damp location, such as showers, like Portland cement based siding. If it used outdoors in an exposed location, it needs some form of coating, such as paint. It can be used structurally as in bracing for wall and semi-structurally, such as an under layment for flooring.
1. Salt (Sodium Chloride) Brines and Salt Water
2. Chlorine Bleach (sodium hypochlorite) & Related Pool Chemical
3. Exposure to Water and Moisture & Freeze thaw cycles
4. Changes in Temperature up to 8000 Centigrade
5. Repeated Wetting and Drying or Freezing and thawing
6. Swelling, Losing Strength or Deterioration
7. Moulds, Mildew, Bacteria, Fungus, Termites, Rodents and other Organisms
9. Impact Damage
1. Facial surface layer
2. Fiberglass net reinforcing layer, which makes the board durable and stable
3. Filler layer (Including mineral cementing agent, perlite and wood chips)
4. Second fiberglass net reinforcing layer
5. Filler layer of the inner side
Lighter than cement board, smoother than drywall, more flexible than cement board, more rigid than drywall, much more inert than either cement board, drywall or wood based board materials.
Interior wall, Ceiling, Exterior Sheathing, Separation Wall, etc.
Primer/Protective Base Coat
Rusting of iron has been an age-old problem. Iron loses strength due to rusting. Iron spontaneously combine with oxygen and moisture to form a variety of oxides depending upon the conditions of exposure. The initially formed ferric hydroxide Fe (OH)3 undergoes various changes during the process of corrosion and forms magnetite Fe3O4 or called 'rust'. However, this temporary passive stability is gone when the loose rust begins to flake away, exposing the inner surface to further process of rusting and so on.
Chemistry at its best
Glo-Protek Rust Converter Primer (GPSC) is a revolutionary, hi-tech product that reverses the process of rusting, GPRC with its reactive VX-polymer converts rust into a stable metal complex without losing the strength of the metal. This is accompanied by an encapsulation process through the formation of a protection film coat. The lighter coloured GPRC, when applied on the surface of the metal changes to a dark blackish coloured protective coating film. This marks the END OF RUSTING OR CORROSION of the metal surface. GPRC is an insulating polymer. GPRC is also a 'water-based' system and it is nonflammable and non-toxic.
Surface preparation is the most important step before application to get results and avoid failure.
Remove loose rust scales, flaking rust, old paint and dirt from the corroded metal surface with the use of wire brush, etc. However, there is no need to remove all the traces of rust, since the adherent rust is automatically converted into stable polymer complex compound with GPRC. GPRC also does not require different steps of preparation of the metal surface like sandblasting, phosphating or redoxide coating.
While applying make sure that sufficient amount of solution is used, as the success or failure of such treatment depends on this factor.
Apply GPRC with a brush or a roller, by dip method or simply by spraying on, Apply two uniform coats of GPRC at 30 to 60 minutes interval and allow it to dry to get minimum DFT of 35/60 micron. GPRC is light pink or light gray when applied. Complete protection is achieved within minutes when a blackish to brown protective film is formed on the metal surface. Where the rust is more it appears more brownish and where the rust is less it appears more blackish. Now apply appropriate top coat. GPRC accepts all types of top coats.
Do not transfer the left-over portion of GPRC back into he original container, so as to prevent contamination of the unused product.
Do not apply on metals below 5º C and above 50º C.
GPRC is a reactive anti-corrosive 'base' coat and it requires a top coat.
Explore International is committed to leading edge design and introducing 'SMART LIGHTING SOLUTION' products that set the standard in the industry in terms of performance and reliability. The energy-saving and environmentally friendly products are designed in Singapore with emphasis on quality and value to customers. Presently Explore International has introduced OBERON Brand 2U/3U/4U and spiral series CFL and LED lights in the market and subsequently will launch OBERON'S various array of Smart Lighting products soon.
ENERGY STAR qualified bulbs are available in a wide variety of shades of white light, ranging from yellowish to white to bluish white light, which allows you to customize the mood of your space. ENERGY STAR qualified bulbs come in "warm" colors to match the yellowish light of incandescent bulbs, but you can also choose "cooler" colors with whiter or bluer light.
Home, Office, Hotel, Shop, Restaurant, Gold & Jewelry Shop and so on